Placing your logo on team apparel: why every centimeter counts

By Franzi Broschat-Jendernalik
Published on October 29, 2026
Last updated on October 30, 2026

Placing a company logo on a polo shirt? Sounds pretty simple at first. If you want to put a logo on team apparel, you just have to find the right spot, right? In reality, there is a lot more work behind it than you might think. Especially when you want to outfit an entire team with matching apparel.

A polo shirt in size S has very different proportions than one in XL. On top of that, women's and men's styles are cut differently. If we placed the logo at exactly the same distance from the collar on every shirt, the result could end up looking quite inconsistent. And that is exactly what you want to avoid with your company apparel.

That's why, at Lamasuli in Schweinfurt, we think about where the logo should sit on each garment before the actual apparel decoration begins. We create precise placement sketches, take the different sizes into account and check the placement during production. Using a recent order, we'll show you how much work really goes into it and why sometimes just a few millimeters make a difference.

Why is the right logo position on team apparel so important?

Imagine you order 50 polo shirts with your company logo for your employees. The sizes range from S to 3XL and, of course, all the shirts should look as uniform as possible in the end. What sounds obvious at first glance is not that easy in apparel decoration. Every garment has different measurements. Even with identical styles, the length and width of the shirt change with the size. Then there are different cuts, button plackets and seams. If we placed a company logo on all shirts at exactly the same distances, it could sit too low on smaller sizes and too high on larger ones.

For this reason, we always base the placement on the proportions of the garment in question. On Polo shirts we use the button placket as a guide, for example. For back logos, on the other hand, we set different distances from the collar seam depending on the size. Our goal is for your team to look uniform in the end and for the logo to sit in the visually right spot on every garment. It's simply not enough to define a position once and then transfer it to all sizes.

Where exactly does the logo go on a polo shirt?

How far does the logo actually have to be from the collar? And are there fixed measurements for it? There is no one-size-fits-all answer. After all, polo shirts differ by size, cut and manufacturer. At Lamasuli, we therefore look at each style individually and determine where the logo should sit later. It gets especially interesting with back logos. Here we use the collar seam as a reference and measure from there to the top edge of the logo. For a recent order of burgundy polo and long-sleeve shirts, for example, we set a separate distance for every size.

How logo distances differ by size

The following table shows the measurements from our placement sketches for this order:

SizeMen's stylesWomen's styles
S12 cm12 cm
M12 cm12 cm
L13 cm13 cm
XL14 cm13 cm
2XL14 cm14 cm
3XL15 cm–

The values indicate the distance between the collar seam and the top edge of the back logo. No measurement is available for the women's style in size 3XL in this order.

So you can see: while we place the back logo 12 cm from the collar seam on a men's polo shirt in size S, it is already 15 cm in size 3XL. That is a difference of three centimeters.

Why do we do it this way? Quite simply: a larger shirt also offers a larger area. If we placed the back logo at the same distance on every size, it would look too high up on larger shirts. With the different measurements, we make sure the logos look as uniform as possible across the different sizes.

It is important to note, however, that these values come from a specific customer order. So they do not automatically apply to every polo shirt. For other styles, we may well choose different distances because, for example, the cut or the length of the garment is different.

Back view of a burgundy polo shirt with the logo of the Bezirk Unterfranken and a size chart for positioning the back print, designed by Lamasuli.
Placing your logo on team apparel: why every centimeter counts 4

Why does the logo sit differently on women's and men's styles?

You may have noticed that women's and men's polo shirts are sometimes cut quite differently. While men's styles are often a bit straighter, women's polos are usually more fitted. The length of the button placket can differ as well. And that is exactly what we have to consider when we want to place a company logo on the chest. If we simply chose the same distance from the collar for both styles, the logo could end up sitting at different heights. That's why we like to use the button placket as a guide on polo shirts. It helps us determine the right position for the cut in question.

For our recent order of burgundy polo and long-sleeve shirts, for example, we placed the chest logos as follows:

  • Women's styles: The “BALTHASAR” lettering sits level with the fourth button.
  • Men's styles: The bottom edge of the lettering is flush with the lower seam of the button placket.

That may sound like a small difference at first. But it is precisely details like these that can determine how a company logo looks on apparel. After all, you want the logo to be clearly visible on all employees and the team apparel to present a uniform look overall. That's why we define the exact position separately for each style. We take both the cut and the proportions of the garment into account. This way, we can align the chest logo differently on women's and men's styles and still achieve a visually uniform result.

Two burgundy polo shirts with the BALTHASAR logo on the chest, shown with different placements for custom apparel printing by Lamasuli.
Placing your logo on team apparel: why every centimeter counts 5

How does ordering team apparel from Lamasuli work?

You want to order new team apparel for your company but have no idea where the logo should best be placed? Don't worry, we'll take care of that. After all, at Lamasuli we have been working in Apparel decoration for many years and know what matters with different garments and sizes.

Before we start printing or embroidering, we first plan the exact placement. For each style, we create what is called a placement sketch. In it, we record where the logo should sit and which distances we need to observe for the individual sizes.

For our recent order of polo and long-sleeve shirts, for example, we prepared separate placement sketches for four different styles. They show both the position of the chest logo and the exact measurements for the back logo. Our team later uses these documents directly in production.

From your inquiry to the finished team apparel

To help you picture the process, we've summarized the individual steps:

  1. We discuss what you need: Which garments do you need? Which colors and sizes would you like to order? And where should your company logo be visible later?
  2. We plan the logo placement: For each style, we define the position and the corresponding measurements. We also take the different sizes into account.
  3. You receive a mockup: Before we start production, we show you in a digital preview what your team apparel will look like.
  4. We decorate your garments: As soon as everything is agreed, we start printing or embroidering. Our placement sketches serve as a precise working template.
  5. Your team apparel is on its way: After production and our final quality check, we deliver the finished garments to your business.

So you don't have to deal with centimeter measurements or the exact position of your logo yourself. We do that for you. By the way, we create new placement sketches for every customer project, because the garments, logos and desired placements differ from order to order. That means extra work for us, but we're happy to invest it. Because in the end, your team apparel should look exactly the way you imagined it.

Why can't apparel decoration be fully automated?

When we print or embroider several hundred shirts for a customer, we have already defined the exact logo positions in advance. So production should be able to run fully automatically, right? It's not quite that simple. Even with identical garments, there are sometimes small differences that we have to take into account. One reason is how the garments are manufactured. Depending on the production batch, the seams or the distances between the buttons, for example, can vary slightly. That even applies to shirts of the same style and size. A machine does not automatically detect such differences if it works exclusively according to predefined coordinates.

That's why at Lamasuli we also check the individual steps by hand. Our placement sketches give us the exact measurements, but we also look at every single garment.

An employee uses a ruler to measure the position of the white BALTHASAR logo on a burgundy polo shirt, prepared for apparel decoration by Lamasuli.
Placing your logo on team apparel: why every centimeter counts 6

How we check logo placement during production

  • Aligning the garments: We align every shirt by hand along the collar seam or button placket before applying the logo.
  • Checking the first pieces: Before we start a larger run, we compare the first shirt of each size with our placement sketch.
  • Re-measuring regularly: During ongoing production, too, we check the distances and the position of the logos.
  • Final quality check: Before shipping, we check every shirt for correct placement and clean workmanship. We also remove loose threads and fold the finished garments.

You can probably imagine that this work takes quite some time for an order of several hundred garments. But it is exactly these checks that help us spot deviations early and place the logos consistently across the entire order.

What happens when an external supplier produces for us?

For larger orders or bottlenecks, we occasionally work with external suppliers. That doesn't change anything about our quality requirements, though. Our partners receive the same placement sketches and measurements that we use for our own production. And before the finished garments go to our customers, we check every single piece. An order of 250 polo shirts recently showed why this check is so important to us.

For the decoration, we had commissioned a German supplier we have worked closely with for many years. The polo shirts were to be printed using screen printing . When the delivery arrived, however, we noticed right away that something was wrong. Some prints were crooked. Most striking, though, were the ink stains in other places on the polo shirts. That is extremely unusual for professionally executed screen printing. With this printing method, the ink has to dry or cure under controlled conditions after it is applied.

Of course, we contacted our supplier immediately and discussed the issues in detail. It turned out that the drying oven had a defect. It displayed a higher temperature than was actually reached. As a result, the screen printing ink could not cure as intended. It was clear to us that we could not deliver these polo shirts to our customer like that. The supplier therefore replaced the affected garments. At the same time, our feedback enabled them to identify and fix the technical fault.

That is exactly why at Lamasuli we carry out a 100 percent quality check of all garments before we deliver them. We check every single piece and, even with long-standing partners, do not rely solely on their own quality inspection.

For you, this means: whether we decorate your team apparel ourselves or commission an external supplier, we check the finished garments before shipping. Because in the end, we want to deliver apparel where both the quality and the workmanship are right.

Embroidery or print: what suits your team apparel?

Want your company logo on T-shirts, polo shirts or sweatshirts? Maybe you're wondering whether you'd rather have your logo printed or embroidered. Both methods have their advantages. For our recommendation, we mainly look at what your logo looks like and what you want to use the apparel for later.

Embroidery: when your company logo should look premium

An embroidered company logo looks especially premium and withstands many wash cycles. That's why we recommend embroidery , for example, for polo shirts worn by employees in service, at reception or in direct customer contact. There are a few things we have to watch out for when embroidering, though. The many individual stitches can cause the fabric to pucker slightly. That's why we match the embroidery backing and the stitch path to the material and your logo. This allows us to reproduce even finer lettering cleanly and legibly.

Apparel printing: when your logo should be large and clearly visible

If you want to place your company logo large on the back, for example, a good option is often Apparel printing . This also applies to team apparel you want to use at events. For our recent order of burgundy polo and long-sleeve shirts, for example, the back logo is 27 cm wide. At that size, it is quickly noticeable if the lettering sits crooked. That's why we pay attention to exact alignment in apparel printing, too. Then there is the color of the garment. On a dark fabric like burgundy, some ink colors look different than on a white shirt. We take that into account in the decoration as well.

By the way, you don't necessarily have to choose a single technique. We also combine embroidery and apparel printing. For example, we can embroider a small company logo on the chest and print larger lettering on the back.

Is exact logo placement worth it for small businesses, too?

Maybe you're now wondering whether all this effort is worth it if you only need ten or twenty shirts for your team. We think: absolutely! Even with smaller orders, it makes a difference whether your company logo sits properly and the apparel looks uniform. In addition, mistakes in apparel decoration can quickly cause extra costs. We'll show you three examples of why careful planning pays off even for smaller quantities.

Less hassle from misplaced logos

Imagine you've ordered new polo shirts for your team and discover while unpacking that several logos are crooked. Then you have to file a complaint about the affected garments and wait for replacements. That can take several weeks in some cases. This is especially annoying if you need the apparel for an upcoming event or the season opening. With precise planning and regular checks, we want to avoid such mistakes from the start. In the best case, this saves you an additional order and the costs that come with it.

Uniform apparel for reorders, too

A new employee is starting, or you'd like to add more shirts for your team? Then the new apparel should of course look exactly like the garments you already have. That's exactly why we document the positions and measurements in our placement sketches. If you order more polo shirts a few months later, we can refer back to this information and place the logos in the same spots again.

Longer life thanks to clean workmanship

The workmanship itself also plays an important role. A properly applied logo should survive many wash cycles without peeling off or cracking. This is especially important for workwear that is worn and washed regularly. That's why we pay attention to clean workmanship in apparel decoration and check the finished garments before shipping. If the logos last a long time, you also have to replace your team apparel less often.

How can good team apparel help retain employees?

Finding good employees has become a real challenge for many companies. That makes it all the more important that people feel comfortable in their own workplace. Of course, many things play a part in that. But have you ever thought about the role workwear can play?

When you outfit your team with high-quality apparel, you also show your employees that you are investing in them. Well-fitting polo shirts, comfortable sweatshirts or durable workwear make a difference in everyday life. Especially when your employees wear the garments for several hours every day. Of course, nobody will stay with a company for years just because of a nicely embroidered polo shirt. Still, comfortable and uniform gear helps your employees feel good at work and see themselves as part of the team.

First impressions count for new employees, too

Imagine an applicant comes to your business for a job interview. Even before the actual conversation begins, they get a first impression of how your company works and presents itself. That includes how your employees are dressed. Uniform team apparel with a company logo can convey a professional impression. At the same time, applicants see that you put thought into how your team is outfitted.

An analysis by Lamasuli from October 2026 also shows how differently companies present their staff apparel to the outside world. For the study on tradespeople's websites in Mainfranken , Lamasuli examined the websites of a total of 840 trade businesses. The findings:

  • 123 of 840 businesses present their team on their website in uniform workwear.
  • That corresponds to a share of 14.6 percent.
  • Almost every second business examined shows no employees at all on its website.

This means only around 15 out of 100 trade businesses examined show their team online in uniform workwear. Of course, that doesn't mean the remaining companies don't use company apparel. But the analysis shows that many businesses hardly present their employees and their gear on their own website. Yet an authentic team photo with uniform company apparel in particular can make a good first impression. Both on potential customers and on people interested in a job at your company.

Team apparel printing and embroidery at Lamasuli in Schweinfurt

You want to outfit your team with uniform apparel and have your company logo placed on T-shirts, polo shirts or sweatshirts? Then you've come to the right place. At Lamasuli in Schweinfurt, we take care of selecting the garments, the exact logo placement and, of course, printing or embroidering your company apparel. We take time for the small details, too. We create placement sketches, take different sizes into account and check the decoration during production. You receive a mockup in advance and can see what your new team apparel will look like.

You'll find us at Rückertstraße 26 in Schweinfurt. From here, we work with companies throughout Mainfranken, including in Würzburg, Kitzingen, Bad Kissingen and Haßfurt.

Want to have new team apparel printed or embroidered? Then get in touch with us and tell us what you have in mind. We'll take care of the exact placement of your logo.

Frequently asked questions about logo placement on team apparel

How far below the collar should a back logo sit?

At Lamasuli, we take the size and cut of the garment into account. For a recent order of polo and long-sleeve shirts, for example, we chose a distance of 12 cm between the collar seam and the top edge of the logo for sizes S and M. For size L it was 13 cm. For men's styles in XL and 2XL we set 14 cm, and for 3XL it was 15 cm. For the women's styles, the distance was 13 cm for XL and 14 cm for 2XL.

Where do you place the chest logo on a polo shirt?

The chest logo usually sits on the left chest. For the exact height, we at Lamasuli use the cut and the button placket of the polo shirt as a guide. In our recent order, we placed the lettering level with the fourth button on the women's styles. On the men's styles, the bottom edge of the lettering is flush with the lower seam of the button placket.

Do I have to define the exact logo position myself?

No, we do that for you. We have been working in apparel decoration for many years and define the positions and distances for every style and every size. Before production, you receive a digital mockup showing what your team apparel will look like.

Will a reorder look exactly like the first delivery?

Yes, we document the logo positions and measurements in our internal placement sketches. If you later order more garments of the same style, we use this information again. This allows us to place the logos in the same spots on reorders and achieve a result that is as uniform as possible.

What is better for team apparel: embroidery or apparel printing?

For smaller chest logos on polo shirts, we often recommend embroidery. It looks premium and is well suited, for example, to employees in direct customer contact. Larger back logos or designs on event apparel, on the other hand, are often done with apparel printing. You can also combine both methods, for example with an embroidered chest logo and printed lettering on the back.

Which regions does Lamasuli offer apparel decoration for?

We are located in Schweinfurt. From here, we print and embroider team apparel for companies throughout Mainfranken, including in Würzburg, Bad Kissingen, Kitzingen and Haßfurt. We handle both the planning of the logo placement and the subsequent apparel decoration.

Our social media

Quick contact

+49 9721 7027-0

info@lamasuli.de

Rückertstrasse 26
97421 Schweinfurt

Don't miss a thing – subscribe to our newsletter!

News

Linked blog or guide articles:

Decoration methods in a wash test: embroidery, screen printing, DTF, flex and flock, new and after 70 washes at 40 °C (104 °F)
Digital printing

Which decoration method suits your occasion?

Every apparel decorator promises “high quality”. We’d rather give you an honest overview of the common decoration methods and tell you what each one can do and where it reaches its limits. Then you’ll find

Read more
Quote request · Deal of the week

Just enter quantity, name and email. We will get back to you with a quote and a digital mockup.

Quote request

How can we help?

A few quick details and we’ll get back to you with a quote.

Address, opening hours and directions →